Flange Yokes
Filters: JOINT ANGLE = 0, BOLT HOLE DIAMETER = 0.500, | PART NUMBER | SERIES | PILOT TYPE | PILOT DIA. | BOLT CIRCLE DIA. | BOLT HOLE COUNT | BOLT HOLE DIA. | C/L TO FACE | SWING DIA. | JOINT ANGLE | NOTES | VEHICLE CLASS | BRAND |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
2-2-939 |
1310 | F | 2.000 | 3.500 | 4 | 0.500 | 1.650 | 4.500 | 0 | Square Bolt Pattern / Used on Ford car and truck applications 1990 and ealier. | LD | Spicer |
| 3-2-1819 |
1410 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.240 | 0 | Square pattern, Ford trucks with hole in center. | LD | Spicer |
| 3302-1369 |
1330 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, used at rear end from early 90's and up. | LD | PTI |
| T2-2-1369A |
1330 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 45% Lighter | LD | PTI |
| T3-2-1579A |
1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | 6061-T6 Forged Aluminum / 47% Lighter | LD | PTI |
| 3502-1579 |
1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern, fits Ford 8.8 and 9.75 all years. This flange has a large hole for clearance | LD | PTI |
| 4102-1819 |
1410 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.240 | 0 | Square pattern, Ford trucks with hole in center. | LD | Spicer |
| P2-2-939 |
1310 | F | 2.000 | 3.500 | 4 | 0.500 | 1.650 | 4.500 | 0 | Square Bolt Pattern / Used on Ford car and truck applications 1990 and ealier. | LD | PTI |
| 3502-1580 |
1350 | F | 2.000 | 4.250 | 4 | 0.500 | 1.625 | 5.250 | 0 | Square pattern. This flange has a larger hole for pinion nut clearance | LD | PTI |
| 3502-1585 |
1350 | F | 2.000 | 4.750 | 4 | 0.500 | 1.750 | 5.250 | 0 | Square pattern. 3502-1859 with WAS20295 for new F150s | LD | PTI |
| 3-2-1879 |
1350 | F | 2.559 | 4.250 | 4 | 0.500 | 1.618 | 5.250 | 0 | Sq Bolt Pattern / Part has hole thru center. | LD | Spicer |
| 5004617 |
1410 | F | 2.559 | 4.250 | 4 | 0.500 | 1.618 | 0.000 | 0 | Oem only, Proprietary to Nissan. | LD | Spicer |
| 3502-256 |
1350 | F | 2.559 | 4.250 | 4 | 0.500 | 1.618 | 5.250 | 0 | Sq Bolt Pattern / Part has hole thru center | LD | PTI |
| 3302-256 |
1330 | F | 2.559 | 4.250 | 4 | 0.500 | 1.644 | 5.320 | 0 | LD | PTI | |
| 3-2-1839 |
1410 | F | 2.953 | 4.750 | 4 | 0.500 | 2.000 | 5.750 | 0 | Sq Bolt Pattern / Hole in center | LD | Spicer |
| 3-2-1859 |
1350 | F | 2.953 | 4.750 | 4 | 0.500 | 1.750 | 5.750 | 0 | Sq Bolt Pattern / Hole in center | LD | Spicer |
| T3-2-1859A |
1350 | F | 2.953 | 4.750 | 4 | 0.500 | 1.750 | 5.750 | 0 | 6061-T6 Forged Aluminum / 54% Lighter | LD | PTI |
| 3502-1859 |
1350 | F | 2.953 | 4.750 | 4 | 0.500 | 1.750 | 5.750 | 0 | Sq Bolt Pattern / Hole in center, Ford/GM apps, 9L3Z-4782-A | LD | PTI |
| 4102-1839 |
1410 | F | 2.953 | 4.750 | 4 | 0.500 | 2.000 | 5.750 | 0 | Sq Bolt Pattern / Hole in center | LD | PTI |
